- Should I use 12 or 14 gauge speaker wire?
- What voltage is speaker wire?
- Can you use regular speaker wire in walls?
- Can I use speaker wire for LED lights?
- Are speaker wires dangerous?
- How do you hide speaker wires in a wall?
- Is thicker speaker wire better?
- Can I use electrical wire for speakers?
- Can you use low voltage wire for speakers?
- Should I use 2 conductor or 4 conductor speaker wire?
- What type of wire is used for speakers?
- Can you use 240V cable for 12V?
- Can speaker wire catch fire?
- Can I use speaker wire for 12 volt power?
Should I use 12 or 14 gauge speaker wire?
Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms).
For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine..
What voltage is speaker wire?
about 30 voltsThe voltage on a speaker wire depends on amplifier power; for a 100-watt-per-channel amplifier, the voltage will be about 30 volts RMS. At such voltage, a 1% loss will occur at 0.3 ohms or more of inductive reactance.
Can you use regular speaker wire in walls?
In other words, if you do not put your speaker wires inside your wall but on the outside, somehow they will not give off these fumes, and its ok to use non-CL rated wire?. If your house is burning, as in burning down, the speaker wire is going to get burned whether its in the wall of not.
Can I use speaker wire for LED lights?
Yes you can(with the appropriate current rating being taken into consideration, as discussed elsewhere), but speaker wire is more expensive than normal wire “because of better audio properties”, so why not just get some cheap old regular wire..
Are speaker wires dangerous?
As long as the huge currents stay within the wires and the speaker voice coil, it poses no danger to humans. Since the voice coils are much lower impedance than humans, the current will stay there, electrons tend to want to stick to the path of lower resistance.
How do you hide speaker wires in a wall?
Speaker Wire Tape. If you want truly invisible yet permanent wire placement and avoid cutting holes or installing wires through walls, then a flat speaker wire tape is the best option. These types of wires look similar to a ribbon and can be used in a similar manner as packaging tape.
Is thicker speaker wire better?
Thicker wires are better: It’s true that for long runs, thicker wires are better at reducing the effects of resistance. But for most set ups (those with speakers within 100 ft of the amplifier), 16-gauge lamp cord is fine. For speakers 100 to 200 ft. … And from 200 to 400 ft., they recommend 12-gauge wires.
Can I use electrical wire for speakers?
As everyone has already said, you can use the electric wire for speakers. They’re not interchangeable though; don’t try to wire your house with speaker wire.
Can you use low voltage wire for speakers?
should be fine. outdoor lv cable is usually between 8 and 16 gauge, speaker cable is usually 16. so if anything, it should be the same or even a little better.
Should I use 2 conductor or 4 conductor speaker wire?
Four-conductor wire can be more efficient and inexpensive than two-conductor. For instance, if it’s 25 ft. from the receiver to the rear speakers, and 15 ft. between the two rear speakers, you would use 50 ft.
What type of wire is used for speakers?
Most systems will use 16, 14 or 12-gauge AWS wire. 16-gauge copper wire can run up to 48-feet with 8-ohm speakers. So, if you want a wire size that will suit most circumstances, then a 16-gauge copper wire is probably a good fit. For speakers with a lower impedance, then you might go with 12 or 14 AWG just to be safe.
Can you use 240V cable for 12V?
Cables used for 240V domestic wiring are not flexible like 12 Volt auto cables 1:e it is not multi stranded like auto cable and hence is not flexible enough for the purpose to name just one point. I would not agree that 12V cable is dearer.
Can speaker wire catch fire?
Speaker wire can catch fire if a component shorts out. Although protection circuits will shut off the ampere if there is a short. The wire is inherently low voltage; therefore, this is a low-level threat.
Can I use speaker wire for 12 volt power?
Re: Electrical Wire vs Speaker Wire Get some 12 AWG speaker wire and you’ll be fine for your 12V wiring. This assumes that you are not running very long lengths of wire. 12 AWG is roughly 1.6 ohms per 1000′, and you want to draw 7A, so at 1000′ you’d be dropping 11.2V in your wiring.