Question: Do Speaker Cables Really Make A Difference?

Are Monster cables worth the money?

Monster cables and higher-end cables have been around for a few years.

The marketing for these high end cables seem to indicate you’ll get better audio from your speakers by buying these pricey items.

In fact, these very expensive cables don’t make a significant difference.

In fact, high end cables can cause problems..

What is the best speaker cable to buy?

AudioQuest Rocket 11. A sensational speaker cable and 2020 What Hi-Fi? … Chord Company RumourX. Chord Company hits the mark again, with the excellent Rumour X. … Chord Company C-Screen. … QED Reference XT40i. … Atlas Equator 2.0 (2018) … AudioQuest Rocket 22. … QED XT25. … Van den Hul The Clearwater.

Are vintage speakers better than new?

A good quality well engineered vintage speaker will sound better than many cheaper modern speakers. Large vintage speakers turned into slim floor standers of today mainly because of the influence of HT and dual purpose stereos.

Is 12 AWG speaker wire overkill?

The lower the gauge number, the thicker the wire. … Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine.

Do speaker cables matter?

Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step. The Cable Company also has a headphone lending library, for headphones that sell for more than $600.

Can speaker cable be too thick?

Yes, it is perfectly fine to remove a few strands. Go for it. Interestingly in speaker wire, or any wires, the size of the conduit matters and all things being equal thicker wire has lower resistance, but also very important is the distance over which that thickness occurs.

Are optical cables better than HDMI?

Both HDMI and optical pass digital audio from one device to another. Both are better than analog (the red and white cables). … The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio.

Are speaker cables important?

The science of speaker wire and sound quality. … While it’s true that many electrical components & conductors do have capacitance and inductance that can affect the sound, the speaker wire has very little. Far less than what is needed to have a real impact on sound quality & the frequency response of a speaker system.

Is thicker speaker wire better?

Thicker wires are better: It’s true that for long runs, thicker wires are better at reducing the effects of resistance. But for most set ups (those with speakers within 100 ft of the amplifier), 16-gauge lamp cord is fine. For speakers 100 to 200 ft. … And from 200 to 400 ft., they recommend 12-gauge wires.

Is HDMI sound better than optical?

The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats. HDMI can also pass video signals.

Do speaker cables need burn in?

Burning-in cables As a general rule though, most speaker cables need at least 100 hours use before all the improvements they will bring to the performance of the system can be properly experienced.

Can I use 18 gauge wire for speakers?

All speakers work best with the largest gauge wire possible, 18 being the “standard”. … The manual states that up to 20 ft an 18 gauge wire is fine with 16 and 14 gauge for longer runs.

Do I need expensive speaker cables?

Cables inherently have a little inductance and capacitance, but since the ultimate goal is to have all frequencies arrive at the speaker at the same time, more expensive cables go the extra mile and take these factors into account. – Conductor material. The purer the conductor, the more it costs.

How much should I spend on audio cables?

The rule of thumb is to spend about 10%-15% the total cost of your system on cables(which include speaker cable and interconnects).

Can I use electrical wire for speakers?

As everyone has already said, you can use the electric wire for speakers. They’re not interchangeable though; don’t try to wire your house with speaker wire.

Do Ethernet cables affect sound quality?

The Ethernet cable is [also] a big problem. It runs long and can pick up low-frequency noise which cannot be filtered out. This noise will introduce jitter at low frequencies which no PLL circuit can get rid of and it will affect sound quality a lot.

Are audiophile power cables worth it?

This is important, to be sure, and without a power cable your system isn’t going to do very much at all, but the question of course is not whether the cable is essential but whether there are differences in performance between reasonably-well-constructed power cords, and on that question we have to say that the answer …

Do better audio cables make a difference?

Short answer, no. Even expensive cables/interconnects can make no difference. It’s good to read stuff, but with cables, etc. it’s best to identify what aspects of sound are important to you and what you’d like to improve in your system and use that to choose some cables to try and see nothing happen.

Are high end speaker cables worth it?

An expensive cable might sound worse on your system than cheap cable. Or it might sound better. The important thing to remember is that even if it does sound better, it’s such a minuscule improvement that pretty much anything else you can do will have a greater effect on the sound.